Knowledge in Factory automation

Marking technology for Scribe marking

512x288/2019/04/scriblemarking-markatormanfredborriesgmbh.jpg
Scribe marking systems are used for permanent direct marking of components by a needle tip pressed into the workpiece surface with defined force by a preprogrammed movement in the X and Y direction relative to the workpiece surface. This allows the marking of products made of metal, plastics, wood or perspex as well as hardened surfaces with low noise emission. With limitations, it is possible to mark ceramic workpieces or thin-walled components as well. Scribing creates a linear marking. In a...

Supplier: Marking systems for Scribe marking

Borries Markier-Systeme GmbH
72124 Pliezhausen, Germany
» supplier
NILL + RITZ CNC-Technik GmbH Gravier-, Markier- und Lasersysteme
71706 Markgröningen, Germany
» supplier
Telesis MarkierSysteme GmbH
42477 Radevormwald, Germany
» supplier
Automator International srl, 20094 Corsico, Italy
B.K.M. Systeme GmbH, 70794 Filderstadt, Germany
COUTH, 20120 Hernani, Spain
Flemming & Pehrsson GmbH, 12349 Berlin, Germany
GravoTech GmbH (Marke Technifor), 79224 Umkirch, Germany
Joachim Richter Systeme und Maschinen GmbH & Co. KG, 66871 Konken, Germany
MARKATOR Manfred Borries GmbH, 71642 Ludwigsburg, Germany
Pryor Marking Technology, S1 4JX Sheffield, Great Britain
Reggiana Macchine Utensili Srl, 42124 Reggio Emilia, Italy
TECHNIFOR SA, 1708 Miribel, France
Technomark S.A.R.L.
Telesis Technologies, Inc., 43113 Circleville, USA
WHB Markiersysteme GmbH, 78532 Tuttlingen, Germany