Knowledge in Factory automation

Joining systems for Induction brazing

The joining parts are fed manually or automatically and fixed in the joining position. The induction loop is positioned so that the joining parts are enclosed. The solder is added to the soldering joint, For example, as a paste. There should be no sensitive electronic components in the vicinity of the soldered joint, which can be damaged by induced currents. A high-frequency alternating current is then applied to the soldering point and an electromagnetic alternating field is generated. This alternating field induces a voltage in the joining parts, which in turn generates an alternating current and causes heating of the current-carrying surface, whereby the previously applied solder paste melts. In operation cooling of the coil is required. In addition, the monitoring of the soldering point temperature is ensured by a non-contact temperature measuring system.

Supplier: Joining systems for Induction brazing

Ajax Tocco Magnethermic GmbH, 69434 Hirschhorn, Deutschland
ATN Automatisierungstechnik Niemeier GmbH, 12487 Berlin, Deutschland
ELMOTEC Antriebstechnik AG, 5314 Kleindöttingen, Schweiz
Frisch GmbH, 75181 Pforzheim, Deutschland
KÄHNY Maschinenbau GmbH, 71522 Backnang-Steinbach, Deutschland
Unitechnologies SA, 3238 Gals, Schweiz
Wolf Produktionssysteme GmbH, 72250 Freudenstadt, Deutschland